How To Clean Split Ac Unit Mitsubishi

How to clean your air conditioner filter

Cleaning your air conditioner regularly volition ensure optimal efficiency and power consumption.

What you will demand

To get started, you lot will demand a pair of gloves, a cleaning material, vacuum cleaner and our Quick Clean accessory kit.

The MAC-093SS Quick Cleaning kit is available to purchase from your installer or through the Mitsubishi Electric Spare Pats service.

Cleaning the front end panel

Lift the front end panel of your wall unit until yous hear a click.

Hold the hinges and pull to remove.

This panel can be wiped with a dry out cloth or rinsed in luke-warm water, before existence dried with a soft cloth. Place this panel aside for now.

Connecting the quick clean kit

Next we�ll prepare our Quick Clean kit ready for use. Insert the universal adapter into your vacuum cleaner tube, followed by the flexible connection hose. In that location are ii brush sizes provided.

Cleaning the air filter

Let�s now make clean an Air Filter. This should be performed every two weeks. With the front panel open, unclick the Air Filter and remove. Light dust can exist removed with low power vacuuming, or launder in lukewarm water for heavier dirt. Allow to dry and place aside.

You may discover a second filter within the air filter frame � this is the Air Cleaning Filter. Nosotros recommend this is cleaned every three months in the same way every bit cleaning the Air Filter it sits within. Your Air Cleaning Filter should exist replaced annually.

With the air filters removed and cleaned, we�ll at present clean the Heat Exchanger within your air conditioner. This is best to do once the unit has been off for at to the lowest degree five hours to avoid any wet or heat buildup.

Cleaning the heat exchanger

Wearing gloves, vacuum with the big castor attachment only in a vertical action, post-obit the fins of the Oestrus Exchanger.

Employ the minor brush zipper to clean the harder to accomplish, narrow spaces at the top and lesser of the Heat Exchanger.

Lastly, we�ll clean the Fan Unit of measurement itself. These instructions relate to Mitsubishi Electric models fitted with a Quick Clean Trunk allowing piece of cake fan access. Consult your instruction manual if your Fan Unit looks different to this.

Showtime by turning the horizontal vanes downward. Remove by unlocking both sliding tabs to the right.

Cleaning the fan

Swing out the two vertical vanes ane by ane. Clean the air outlet with a soft dry out cloth.

Using your Quick Clean Kit adapters, move your castor forth the blades of the fan horizontally. Identify the vertical vanes back into their respective guides ane by one, they will click into place.

Install the horizontal vane by following the removal steps in reverse. If the horizontal vane isn�t re-installed correctly, all LED lamps volition blink when power is turned back on.

Don�t forget to carefully place the Air and Air Cleaning Filters back into their original positions, along with the front panel fitting. Your Mitsubishi Electric Air Conditioner is now cleaned and ready for utilize.

Source: https://www.mitsubishielectric.com.au/how-to-clean-air-conditioner-filter.html

Posted by: wilkersonnotemed.blogspot.com

Share this post